eMind Technologies Hardware & Networking - CCNP

CCNP ROUTING & SWITCHING

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions. Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician. The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

Prerequisites

Valid Cisco CCNA Routing and Switching certification or any Cisco CCIE certification can act as a prerequisite.

Exams & Recommended Training

Required Exam(s)

300-101 ROUTE 
300-115 SWITCH
300-135 TSHOOT

Recommended Training

Implementing Cisco IP Routing (ROUTE)
Implementing Cisco IP Switched Networks (SWITCH)
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

1.ROUTE - Implementing Cisco IP Routing (300-101)

Exam Description

Implementing Cisco IP Routing (ROUTE 300-101) is a 120-minute qualifying exam with 50‒60 questions for the Cisco CCNP and CCDP certifications. The ROUTE 300-101 exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6. The exam also covers the configuration of highly secure routing solutions to support branch offices and mobile workers.

The following topics are general guidelines for the content that is likely to be included on the exam.

1.0 Network Principles

·         1.1 Identify Cisco Express Forwarding concepts, FIB,Adjacency table

·         1.2 Explain general network challenges,Asymmetric routing

·         1.3 Describe IP operations,ICMP Unreachable and Redirects,TTL

·         1.4 IPv4 fragmentation,Explain TCP operations,MSS,MTU,Windowing

·         1.5 Bandwidth-delay product,Global synchronization

·         1.6 Recognize proposed changes to the network

·         1.7 Changes to routing protocol parameters,Migrate parts of the network to IPv6

2.0 Layer 2 Technologies

·         2.1 Configure and verify PPP,Authentication (PAP, CHAP)

·         2.1 PPPoE (client side only) ,Explain Frame Relay,Point-to-point and Multipoint

3.0 Layer 3 Technologies

·         3.1 Identify, configure, and verify IPv4 addressing and subnetting

·         3.2 Address types (Unicast, broadcast, multicast, and VLSM)

·         3.3 ARP,DHCP relay and server,DHCP protocol operations

·         3.4 Identify IPv6 addressing and subnetting,Unicast,EUI-64,ND, RS/RA

·         3.5 DHCP relay and server,DHCP protocol operations

·         3.6 Configure and verify static routing,Configure and verify default routing

·         3.7 Evaluate routing protocol types,Distance vector,Link state,Path vector

·         3.8 Describe administrative distance,Troubleshoot passive interfaces

·         3.9 Configure and verify VRF lite,Configure and verify filtering with any protocol

·         3.10 Configure and verify redistribution between any routing protocols or routing sources

·         3.11 Configure and verify manual and auto summarization with any routing protocol

·         3.12 Configure and verify policy-based routing,Explain ROUTE maps

·         3.13 Identify suboptimal routing,Route tagging and filtering

·         3.14 Configure and verify loop prevention mechanisms

·         3.15 Split-horizon,Route poisoning,Configure and verify RIPv2,Describe RIPng

·         3.16 Describe EIGRP packet types,Configure and verify EIGRP stubs

·         3.17 Configure and verify EIGRP neighbor relationship and authentication 

·         3.18 Configure and verify EIGRP load balancing,equal cost,Unequal cost

·         3.19 Describe and optimize EIGRP metrics,Configure and verify EIGRP for IPv6

·         3.20 Describe OSPF packet types

·         3.21 Configure and verify OSPF neighbor relationship and authentication

·         3.22 Configure and verify network types, area types, and router types

·         3.23 Point-to-point, multipoint, broadcast, no broadcast

·         3.24 LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub

·         3.25 Internal router, backbone router, ABR, ASBR,Virtual link

·         3.26 Configure and verify OSPF path preference,Configure and verify OSPF operations

·         3.27 Configure and verify OSPF for IPv6

·         3.28 Describe, configure, and verify BGP peer relationships and authentication

·         3.29 Peer group,Active, passive,States and timers

·         3.30 Configure and verify eBGP (IPv4 and IPv6 address families) 4-byte AS number,Private AS

·         3.31 Explain BGP attributes and best-path selection

4.0 VPN Technologies

·         4.1 Configure and verify GRE

·         4.2 Describe DMVPN (single hub)

·         4.3 Describe Easy Virtual Networking (EVN)

5.0 Infrastructure Security

·         5.1 Describe IOS AAA using local database

·         5.2 Describe device security using IOS AAA with TACACS+ and RADIUS

·         5.3 AAA with TACACS+ and RADIUS,Local privilege authorization fallback

·         5.4 Configure and verify device access control

·         5.5 Lines (VTY, AUX, console),Password encryption,Management plane protection

·         5.6 Configure and verify router security features

·         5.7 IPv4 access control lists (standard, extended, time-based)

·         5.8 IPv6 traffic filter,Unicast reverse path forwarding

6.0 Infrastructure Services

·         6.1 Configure and verify device management,Console and VTY

·         6.2 Telnet, HTTP, HTTPS, SSH, SCP,Configure and verify SNMP V2, V3

·         6.3 Configure and verify logging,Local logging, syslog, debugs, conditional debugs,Timestamps

·         6.4 Configure and verify Network Time Protocol (NTP),NTP master, client, NTP authentication

·         6.5 Configure and verify IPv4 and IPv6 DHCP,DHCP client, IOS DHCP server, DHCP relay

·         6.6 Configure and verify IPv4 Network Address Translation (NAT) ,Static NAT, dynamic NAT, PAT

·         6.7 Describe SLA architecture,Configure and verify IP SLA,ICMP

·         6.8 Configure and verify tracking objects,Tracking objects

·         6.9 Configure and verify Cisco Net Flow,NetFlow v5, v9,Export (configuration only)

2.SWITCH - Implementing Cisco IP Switched Networks (300-115)

Exam Description

Implementing Cisco IP Switched Networks (SWITCH 300-115) is a 120-minute qualifying exam with 45‒55 questions for the Cisco CCNP and CCDP certifications. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.

The SWITCH exam also covers highly secure integration of VLANs and WLANs.

The following topics are general guidelines for the content that is likely to be included on the exam.

1.0 Layer 2 Technologies

·         Configure and verify switch administration,SDM templates

·         Managing MAC address table,Troubleshoot Err-disable recovery

·         Configure and verify Layer 2 protocols,CDP, LLDP,and UDLD

·         Configure and verify VLANs,Access ports,VLAN database

·         Normal, extended VLAN, voice VLAN,Configure and verify trunking,dot1Q,Native VLAN

·         VTPv1, VTPv2, VTPv3, VTP pruning,Manual pruning

·         Configure and verify Ether Channels LACP, PAgP, manual,Layer 2, Layer 3

·         1.8. Load balancing Ether Channel misconfiguration guard

·         Configure and verify spanning tree,PVST+, RPVST+, and MST

·         Switch priority, port priority, path cost, STP timers,Port Fast, BPDUguard, and BPDUfilter

·         Loop guard and Root guard, SPAN, RSPAN

2.0 Infrastructure Security

·         2.1 Configure and verify switch security features

·         2.2 DHCP snooping,IP Source Guard,Dynamic ARP inspection

·         2.3 Port security,Private VLAN,Storm control

·         2.4 Describe device security using Cisco IOS AAA with TACACS+ and RADIUS

·         2.5 AAA with TACACS+ and RADIUS,Local privilege authorization fallback

3.0 Infrastructure Services

·         3.1 Configure and verify first-hop redundancy protocols HSRP, VRRP, GLBP

3. TSHOOT-Troubleshooting and Maintaining Cisco IP Networks v2 (300-135)

Exam Description

Troubleshooting and Maintaining Cisco IP Networks v2 (TSHOOT 300-135) is a 120-minute qualifying exam with 15‒25 questions for the Cisco CCNP certification. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:

·          Plan and perform regular maintenance on complex enterprise routed and switched networks

·          Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting

The following topics are general guidelines for the content that is likely to be included on the exam.

1.0 Network Principles

·         Use Cisco IOS troubleshooting tools,Debug, conditional debug

·         Ping and trace route with extended options,Apply troubleshooting methodologies

·         1.3. Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)

·         Design and implement valid solutions. Verify and monitor resolution

2.0 Layer 2 Technologies

·         2.1 Troubleshoot switch administration,SDM templates

·         2.2 Managing MAC address table,Troubleshoot Err-disable recovery

·         2.3 Troubleshoot Layer 2 protocols. CDP, LLDP and UDLD

·         2.3 Troubleshoot VLANs. Access ports VLAN database,Normal, extended VLAN, voice VLAN

·         2.4 Troubleshoot trunking VTPv1, VTPv2, VTPv3, VTP pruning.dot1Q,Native VLAN Manual pruning

·         2.5 Troubleshoot EtherChannels,LACP, PAgP, manual,Layer 2, Layer 3 Load balancing

·         2.6 Ether Channel misconfiguration guard

·         2.7 Troubleshoot spanning tree, PVST+, RPVST +, MST

·         2.8 Switch priority, port priority, path cost, STP timers

·         2.9 PortFast, BPDUguard, BPDUfilter, Loop guard, Root guard

·         2.10 Troubleshoot other LAN switching technologies

·         2.11. SPAN (Switch Port Analyzer Port), RSPAN

3.0 Layer 3 Technologies

·         3.1 Troubleshoot IPv4 addressing and subnetting, Address types 3.1.a)

·         3.2 ARP,DHCP relay and server

·         3.3 Troubleshoot IPv6 addressing,Unicast,EUI-64,ND, RS/RA

·         3.4 Troubleshoot static routing and default routing

·         3.5 Troubleshoot administrative distance and passive interfaces

·         3.6 Troubleshoot filtering with any protocol

·         3.7 Troubleshoot between any routing protocols or routing sources

·         3.8 Troubleshoot manual and auto summarization with any routing protocol

·         3.9 Troubleshoot policy-based routing and suboptimal routing

·         3.10 Troubleshoot loop prevention mechanisms,Split-horizon

·         3.11 Troubleshoot RIPv2,EIGRP neighbor relationship and authentication

·         3.12 Troubleshoot loop free path selection,RD, FD, FC, successor, feasible successor

·         3.13 Troubleshoot EIGPR operations,Stuck in active

·         3.14 Troubleshoot EIGRP load balancing equal cost and unequal cost

·         3.15 Troubleshoot EIGRP metrics

·         3.16 Troubleshoot OSPF neighbor relationship and authentication

·         3.17 Troubleshoot network types, area types, and router types

·         3.18 Point-to-point, multipoint, broadcast, nonbroadcast

·         3.19 LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub

·         3.20 Internal router, backbone router, ABR, ASBR, Virtual link

·         3.21 Troubleshoot OSPF path preference

·         3.22 Troubleshoot BGP peer relationships and authentication

·         3.23 Peer group,Active, passive,States and timers

·         3.24 Troubleshoot eBGP,4-byte AS number,Private AS

4.0 VPN Technologies

·         4.1 Troubleshoot GRE

5.0 Infrastructure Security

·         5.1 Troubleshoot IOS AAA using local database,device access control

·         5.2 Troubleshoot Lines (VTY, AUX, console),Management plane protection

·         5.3 Password encryption,Troubleshoot router security features

·         5.4 IPv4 access control lists (standard, extended, time-based)

·         5.5 Unicast reverse path forwarding

6.0 Infrastructure Services

·         6.1 Troubleshoot device management,Console and VTY, Telnet

·         6.2 Troubleshoot SNMP V2, V3

·         6.3 Troubleshoot logging,Local logging, syslog, debugs, conditional debugs,Timestamps

·         6.4 Troubleshoot Network Time Protocol (NTP)

·         6.5 DHCP client, IOS DHCP server, DHCP relay

·         6.6 Static NAT, Dynamic NAT, PAT ,Troubleshoot SLA architecture

Thanks & Regards

Sahil Mittal

Academic Counselor

eMind Technologies#352, 2nd Floor, 12^th Main

Dr Rajkumar Road, Next To Al -Bek Restaurant,

Above Mannapuram Gold Loan, Rajajinagar 6^th Block, Bangalore – 560010.

Mobile - +91-8095275035, +91-9008075333

E-mail:    s.mittalsgnr@gmail.com

Website  Professional Staffing Solutions, Corporate Training Services, CCNA Training Institute In Bangalore

Website www.emindtechnologies.net

Hardware & Networking Training || CISCO ||  Microsoft server ||  RHCE || Soft Skills Training //